Steady Hauk Aerial Photography Package (Non-FPV)
Steady Hauk Aerial Photography Package (Non-FPV)
The NEW entry level Steady Hauk Aerial Platform is high performance air frame made of carbon fiber and spinning 10” props it is the perfect small light weight high efficient and quite aerial platform perfect for your aerial needs be it for real estate or building and industrial inspection.. Using two of the best flight controllers we give you the option of which one you want to go with if you fly with a DJI we offer the solution with the DJI A2 with Gps this is a great flight controller which is very stabilized and easy to use and has the ability to expand on as you grow.. The second option is the Holybro PixHawk 4 Mini this flight controller is next level as it is a fully capable autonomous Flight controller with the use of data radios (purchased separately). In both cases each Flight Controller has safety features such as RTL (Return and Land) and Stabilized Mode. Included in this package is the FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo (Mode 2) this is a great radio easy to use and setup perfect for the entry level or experienced aerial photographer.
These are custom built and machined In Maine and built on a “ Made to Order” basis please allow for 7-10 business days for order to be shipped. If you need your drone sooner please contact us directly with your needs and we will do our very best to get you up and running.
1- Carbon Fiber Air Frame
4-Carbon Fiber 16mm Booms
1- Retractable Landing Gear with Carbon Fiber Skids
1-Carbon Fiber Canopy
Interior Battery Mount tray for a Tattu 3s 5500mah battery
1- Flight Controller of your Choice (only 1 included)
1-FrSky Taranis X9D Plus 2.4GHz ACCST Radio & X8R Combo (Mode 2)
4-Garret 2212 920kv Motors and esc package (Production Motors will use standard motor nuts with standard 10” x4.5 Props with prop nuts.)
4- 10” APC Props
1- 2 Axis Gimbal Stock
Designed for FPV with Forward Mounted Camera Mount. (Free Download)
We will be shipping via USPS a shipping cost of $45 will be automatically added to order for shipping. Additional items in cart are added at a flat rate of $6 per item. To keep cost down the items will be shipped ground. If you need the items next day please contact us directly for shipping quote.
Included Radio Specifications:
This is the new and very powerful FrSky Taranis RC X9D Plus radio system. The radio also includes a Haptic Vibration Feedback System which provides an alternative feedback system to the existing voice and sound. If you are a club member this is a welcome addition without annoying your fellow club members. The Plus also includes a dual color LCD back-lit screen, allowing you to adjust from white to blue. Each radio ships with the newest firmware version to support the new haptic vibration feedback system. This combo includes the FrSky X8R 16ch Receiver with SBUS, Smart Port and Amplified PCB Antennas.
Note: The SWR check of the transmitter antenna is no longer available.
When it comes to possibilities the Frsky TARANIS sets a new standard. FrSky is well known for their frequency hopping ACCST technology, that takes advantage of the entire 2.4GHz band, resulting in excellent range and reliability, they now offer their first full transmitter system.
The TARANIS mixes the power of the “OPEN TX” open-source software with an unbelievable ergonomic case with 8 programmable switches, two twist knobs and two easy to get to lateral 'slider' pots, and not to mention the ultra-smooth quad bearing gimbals.
The TARANIS utilizes Voice Alerts from an internal speaker, versus just an annoying beeper. For things like; audible Count down timers, low voltage warnings, landing gear down warnings etc., just about anything can be programmed, you can even use your own voice. The SD card slot offers unlimited memory options and a USB port for upgrades even a headphone jack.
One of the best features of the TARANIS is its full telemetry capability, as well as RSSI signal strength feedback, there are 3 different programmable fail-safe modes and receiver lock, so no more crashes due to selecting the wrong model. If you have stock in other brand receivers or BNF’s, no worries the TARANIS has a JR style RF module slot, so you have the option of other brand modules such as the Orange DSM2/DSMX or Open LRS 433mhz module, or pop in another Frsky module to expand the transmitters capabilities even more with duel RF.
When you put it all together, between FrSky ACCST technology and the power of “OPEN TX” software and community, a ergonomic case with ultra-smooth smooth ball bearing gimbals and a large back-lit LCD with an included battery pack. You have versatility and power at an unprecedented value.
New in X9D Plus
Haptic Vibration Feedback System
Adjustable Screen colors (White to Blue)
RSSI alarms (warns you of reception problems before it becomes an accident)
16 channels (more when combined with external module)
64 mixers, 9 flight modes
16 custom curves with 3-17 points each, 32 logic switches
Self-test of the transmitter antenna
60 Model memory (expandable via a SD card)
Audio Speech outputs
USB and SD card slot for unlimited memory, and firmware upgrades, sound editing.
Long range system capable of up to 3 times the range of current systems
Quad bearing gimbals that are silky smooth
State-of-the-art open source software (open TX)
Super low latency for ultra-quick response (9ms)
Large back-lit display
Real-time data logging
Receiver lock (program locked to aircraft)
JR Style module bay for additional RF modules
Processor: STM32 ARM Cortex M3 60MHz
Model name: Taranis X9D Plus
Number of Channels: up to 16
Operating Voltage Range:6-15v (2s, 3s Lipos are acceptable)
Operating Current: 260mA maximum (both RF module and backlit are on)
Operating Temperature: -10~60C
Backlit LCD Screen: 212*64 Monochrome
Model Memories: 60 (expandable by SD card)
Compatibility: FrSky X series, D series and V8-II series receivers
Stick mode: Mode 2 (Left hand throttle)
Taranis X9D Plus ACCST 2.4GHz Transmitter (Mode 2 version)
1x X8R 16ch Receiver with PCB Antenna
1x 6-cell 2000mAh NiMH Transmitter Battery
Radio battery wall charger
Flight Controller Options: (NOTE ONLY the Controller Ordered will Be Shipped)
The Pixhawk® 4 Mini autopilot
The Pixhawk® 4 Mini autopilot is designed for engineers and hobbyists who are looking to tap into the power of Pixhawk 4 but are working with smaller drones. Pixhawk 4 Mini takes the FMU processor and memory resources from the Pixhawk 4 while eliminating interfaces that are normally unused. This allows the Pixhawk 4 Mini to be small enough to fit in a 250mm racing drone.
Pixhawk 4 Mini was designed and developed in collaboration with Holybro® and Auterion®. It is based on the Pixhawk FMUv5 design standard and is optimized to run PX4 flight control software.
Main FMU Processor: STM32F765
32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
GPS: ublox Neo-M8N GPS/GLONASS receiver; integrated magnetometer IST8310
8 PWM outputs
4 dedicated PWM/Capture inputs on FMU
Dedicated R/C input for CPPM
Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input
3 general purpose serial ports
2 I2C ports
3 SPI buses
1 CANBuses for CAN ESC
Analog inputs for voltage / current of battery
2 additional analog input
Power Brick Input: 4.75~5.5V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~24V
Max current sensing: 120A
Weight and Dimensions:
Weight: 36g (FC)
Operating temperature: -40 ~ 85°c
Pixhawk4 mini *1
Pixhawk4 GPS MODULE *1
PM06 V2 Power Management Board *1
I2C splitter Board *1
6 to 6 pin cable (power) *1
4 to 4 pin cable (CAN) *1
6 to 4 pin cable (Data) *1
6 to 4 pin and 4 pin "Y"cable *1
6 to 6 pin cable(Debug) *1
PPM/SBUS out cable *1
XSR receiver cable *1
DSMX receiver cable *1
SBUS receiver cable *1
USB cable *1
'X'type folding pedestal mount *1
70mm & 140mm carbon rod stand off *2
Foam Set *1
Pixhawk4 mini Quick Start Guide *1
DJI-A2 Flight Controller with GPS
The DJI A2 Flight Controller is the most advanced multirotor stabilization controller on the market, and it ensures total ease of flight, reliability, and stability in any situation. The A2 is a total solution for aerial photography.
Supports all multirotor platforms.
Ideal for DJI video downlink, iOSD, Ground Station, Zenmuse gimbals. Compatible with future DJI products.
All modules can be upgraded online through Assistant to offer more functionalities.
Supports 9 Types of Multi-rotor and a Customized Motor Mixer
It’s a UAS that’s targeted at commercial and industrial multi-rotor platforms with simple configuration, easy installation and stable performance. It also supports customized motor mixing, which can meet the demand of high-end users.
Intelligent Orientation Control (IOC)
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), it's possible to lock the forward direction independent of the nose direction. It's also possible to lock the forward direction to a preselected home point.
Point of Interest (POI)
A2 has a POI function: Point of Interest. When the GPS signal is good, users can record the current position of the aircraft as a point of interest by a preset switch on the remote controller. The aircraft can achieve a circling flight around the point of interest with the nose pointing at the POI in an area of 5 meters to 500 meters radius, when the roll command is given. This function is easy to set and simple to operate, it is suitable for all-round shooting of a fixed scenic spot.
Intelligent Landing Gear Function
Once you have enabled the Intelligent Landing Gear function in the assistant software, the landing gear defaults to the Lower position when the aircraft is on the ground; and the system will lower the landing gear in emergency, motor failure or auto landing in order to protect the aircraft and gimbal. You can choose to lower or retract the landing gear by a switch when the aircraft altitude is over 5m from the ground.
Auto Return-To-Home /One-Key Go-Home
If the multirotor and its controller disconnects during flight, the system’s failsafe protection will come to the rescue and if the signal is good enough, the multirotor will return to home and land automatically.
You can also program a One Key Go Home function through the Assistant software.
Multi-Rotor One-Motor Fail Protection
This function means that when the aircraft is in attitude or GPS attitude mode, and one of the motors stops, the aircraft will retain good attitude and rotate around the frame arm with the stopped motor. In this condition, the aircraft is still under control and returns home safely and highly reduces the risk of a crash.
Size and Weight
Hex-Rotor +6,x6,Y6,Rev Y6;
Supported ESC Output
400Hz refresh frequency
Supported Transmitter For Built-In Receiver
Futaba FASST Series and DJI DESST Series
External Receiver Supported
Futaba S-Bus, S-Bus2, DSM2
2S ~ 6S LiPo
-5°C to +60°C
Assistant Software System Requirement
Windows XP SP3 / 7 /8 (32 or 64 bit)
Other DJI Products Supported
Z15,H3-2D,iOSD,2.4G Data Link,S800 EVO
Hovering Accuracy(In GPS Mode)
Vertical: ± 0.5m
Horizontal: ± 1.5m
Maximum Wind Resistance
< 8m/s (17.9mph/28.8km/h)
Max Yaw Angular Velocity
Max Tilt Angle
Electrical & Mechanical
MAX 5W (Typical Value: 0.3A@12.5V）
Multiple Control Modes
2-axis Gimbal Supported
Low Voltage Protection
PC & Bluetooth Ground Station
External Receiver Supported
Intelligent Orientation Control
4 Configurable Output
Total Weight: <= 224g(overall)
Flight Controller: 54mm x 39mm x 14.9mm
IMU: 41.3mm x 30.5mm x 26.3mm
GPS-Compass Pro: 62mm (diameter) x 14.3mm
LED-BTU-I: 30mm x 30mm x 7.9mm
PMU: 39.5mm x 27.6mm x 9.8mm